Setup guide

Getting started with HuskyBIM

From zero to your first AI-powered AEC workflow in under 10 minutes. This guide covers everything you need — account, download, installation and a first test.

Before you begin

You need three things before starting:

Requirement	Details
Claude Desktop	The desktop app for Claude by Anthropic. Download from claude.ai/download. A Claude subscription is required.
HuskyBIM subscription	An active HuskyBIM subscription. Get started here if you don't have one yet.
AEC software	The software you want to connect to — Revit 2026, Microsoft Project, Archicad 29, or none (for HuskyMCP).

HuskyBIM is a local connector, not a cloud service. It doesn't store your model or send it to HuskyBIM — it only validates your account (email + machine ID). The model data you ask Claude about is sent to Claude (Anthropic) through your own Claude Desktop to answer, exactly as in any Claude conversation; see privacy.

Step-by-step setup

Create your account and subscribe

Go to /get-started and choose a plan. You'll receive a confirmation email. Your account is accessed via one-time code — no password required.

Install Claude Desktop

Download and install Claude Desktop from claude.ai/download. Sign in with your Anthropic account. Claude Desktop must be running alongside your AEC software for HuskyBIM to work.

Download your HuskyBIM connector

Log in to your account page and go to the Downloads section. Download the installer for the software you want to connect to:

• Revit: HuskyBIM_for_Revit_v1.5.exe — run the installer
• ArchiCAD 29: HuskyBIM_for_ArchiCAD_29_v1.0.2.exe — run the installer
• MS Project: HuskyBIM_for_MS_Project_v1.0.0.mcpb — install via Claude Desktop
• HuskyMCP: no download — add https://mcp.huskybim.com/mcp as a custom connector in Claude Desktop

Install and activate

Revit / ArchiCAD 29: Run the .exe installer as Administrator. When prompted, enter the email address you used to subscribe. The installer validates your subscription, installs the add-in and configures Claude Desktop automatically — no further setup needed.

MS Project: On your account page, generate an Extension Token. Then drag the .mcpb file into Claude Desktop and paste the token when asked. See the token guide for details.

HuskyMCP: In Claude Desktop go to Settings → Connectors → Add custom connector, name it HuskyMCP and paste https://mcp.huskybim.com/mcp.

Open your AEC software and Claude Desktop

Start both Claude Desktop and your AEC software (e.g. Revit with a project open). HuskyBIM connects automatically when both are running.

Run your first workflow

In Claude Desktop, try a simple request to verify the connection is working:

List all levels in the current Revit model.

Claude will call HuskyBIM and return the result directly in the conversation. If you see a list of levels, setup is complete.

Troubleshooting

Claude doesn't seem to have access to Revit or Archicad

Make sure both Claude Desktop and your AEC software are running with a project open. Try restarting Claude Desktop after installation. If the issue persists, re-run the installer.

MS Project token not accepted

Tokens are tied to your account. Generate a new token from your account page and re-enter it. See extension token for details.

Still stuck?

Check the FAQ or contact us — we're happy to help.