Reference

Changelog

Release history for all HuskyBIM products. Each connector is versioned independently.

Plugin v1.53 Revit August 2026
New
Coordination audit beyond clash counting. Zero clashes does not mean zero risk. One check lists the coordination problems a clash report never shows: open pipe and duct connectors, runs that belong to no system, ducts and pipes passing through wall, floor, roof or beam material with no opening cut (real solid intersection, hosts from the model and from linked models), equipment with no service space in front, doors that cannot swing, rooms that are unplaced or not enclosed, long horizontal runs with no support nearby. Every check says what it measured and what it was judged against; a check that could not finish is reported as such, never as a clean zero. Verdict and CSV included.
IDS on the live model. Validate the open model against a buildingSMART IDS file without exporting IFC: entity, attribute, property, classification and material facets are mapped onto Revit categories, IFC export overrides, parameters (with the usual Pset synonyms such as FireRating → Fire Rating), classification codes and materials, and every failing element says why. partOf is declared unsupported rather than silently passed. A second tool writes an IDS draft from what the model actually contains — one specification per category with the parameters present, their data types and coverage — so a delivery specification never starts from a blank schema.
Build from a plan. Describe levels, walls, doors, windows, floors, rooms and family instances in one call and Revit builds them in one transaction — one Ctrl+Z removes everything. Dry-run first: every level, type and host is resolved and reported before anything is created. Read a floor-plan image, a facade photo or a sketch in the chat, then let this place the elements.
Cost estimate from your own rates. Measured quantities (m², m³, m, pieces) multiplied by a rate table you provide inline or as CSV/Excel. Nothing is priced that has no rate: unpriced groups come back with their quantities so you can add one. Totals by category, grand total, CSV — and the priced lines can go straight into HuskyBIM for Sigma.
Rule skills. Turn a requirement (“all exterior doors need Fire Rating EI30”) into a saved, deterministic check the add-in runs without any AI: category, filters, conditions, severity and source. Run one, several or all rules and get pass/fail per element with the actual value, a verdict and a CSV. Lengths in mm, areas in m², volumes in m³.
Terrain. Ask for the terrain elevation at any points (toposolids and legacy topography, view-independent) and place a building massing on the terrain: the footprint is sampled, the base elevation chosen (average, lowest, highest or given) and one mass per storey is created above and below ground in one transaction.
Dynamo graphs written from the chat. Read any Dynamo graph (nodes, code, inputs, connections, packages), create a new graph from code blocks, Python nodes, inputs, watch nodes, Revit category nodes and any zero-touch node, and edit an existing one (code, input values, names, nodes, connections). Graphs are written for the Dynamo version of the running Revit and opened with the existing Dynamo tool.
MEP reports on Revit's own calculations. Per-system pressure-loss tables with the index route and the pressure the fan or pump must deliver; required versus actual airflow per space (BR18 §443 or EN 16798-1, every rate adjustable and its source declared); a per-space summary of airflows, loads and devices; provisions for builderswork openings computed from the real intersections of ducts and pipes with walls, floors and beams (also in linked models), sized with offset and rounding, flagged when the host is fire-rated — placed as markers for the structural engineer or cut as real openings; and a free-height check per room under the lowest duct or pipe.
Share skills. Export a saved skill as a JSON file and import it on another machine (with a new name if needed).
Plugin v1.52 Revit August 2026
New
Shafts and sketches. List every shaft opening with its levels and footprint — and spot the classic broken sketch (two identical rectangles drawn on top of each other, Revit's “Highlighted lines overlap”). Create shafts from a rectangle or polygon between two levels, read the sketch behind any sketch-based element (shaft, floor, ceiling, roof, filled region) with an overlap analysis that names the duplicate lines, and clean it up through Revit's own sketch editor without redrawing — dry-run first, lines and warnings counted before and after. Sketch profiles can also be replaced outright from the API; if Revit rejects the result the model is left unchanged.
Duplicate instances. Find elements sitting exactly on top of an identical copy (Revit's own warning plus a geometric check) and remove the extra copies in one transaction.
Paint the face you mean. Face painting now takes a face index, a list of indices or a side (top, bottom, north, south, east, west, largest, all), and a new tool lists an element's faces with side, area and normal so you can choose. Every painted face is checked afterwards.
Materials with colour. Create a material with a colour ([r,g,b], #RRGGBB or a name like red), transparency, shininess and smoothness — and read it back. DirectShapes built from vertices or a box can carry a material or colour, a name, comments and a mark.
Survey point and shared coordinates. Read the survey point and project base point (internal position, shared position, clipped state), and run Revit's “Specify Coordinates at Point” from the API at the base point, the survey point, the internal origin, any point or any element — measured before and after, with dry-run.
Fixed
Setting the project base point used to drag the base-point element across the model — hitting Revit's 16 km limit and a dialog that blocked everything. It now relocates the shared coordinate system so the base point reads the values you give, and nothing moves relative to the internal origin.
Face painting ignored the face you asked for and always painted the first face; material creation ignored the colour. Both now do what the call says and verify it.
Setting a level's Elevation reported success and changed nothing. It now persists — and every parameter write reads the value back from the model and tells you whether it really landed.
Area and volume for DirectShapes, in-place families and imports came back as zero. They are now computed from the solid geometry when Revit has no parameters for them, and the reply says which source was used.
Category names with spaces (“Shaft Openings”, “Generic Models”) are accepted everywhere a category is asked for, and an unknown name fails clearly instead of silently falling back.
Openings in floors, ceilings and roofs: the tool promised them and then refused everything but walls. It now cuts them.
Dialogs that never pass through Revit's dialog event (for example the coordinate warnings) were invisible to the pending-dialog check. When Revit's main window is blocked, the open dialogs are now listed with their buttons, and a button can be clicked by its caption.
Plugin v1.51 Revit August 2026
New
Real Model Text from the chat. Revit's own API cannot create Model Text in a project — HuskyBIM now authors it in a family behind the scenes and places it, so you get a genuine Model Text element with your font, size and depth. List every 3D text in the model, and edit native Model Text directly; text that is baked in (family-based or extruded 3D text) says so honestly and is replaced in one step.
Find any text. One search covers all four text kinds — 2D text notes, Model Text and both kinds of 3D text — and tells you which kind each hit is.
Fixed
Element search: the value filter was silently ignored (a field-name mismatch), and an unrecognised category made the search quietly cover the whole model. The value filter now works, category names with spaces are accepted, and an unknown category returns a clear error instead of noise.
Plugin v1.50 Revit August 2026
New
Colour a whole category in one call. Set the Object Styles material for any category (with a named material or a plain colour) — every element of that category gets it on all faces, and the colour follows into IFC export.
Coloured 3D shapes. Extruded DirectShapes can now be created with a material or a plain colour baked in — all faces, straight into IFC — plus a name, comments, mark and pinning in the same call.
Fixed
Important: on Revit 2027, setting the site elevation (v1.49) could silently reset the model's shared coordinates — project position, kote and True North all read zero afterwards. The elevation is now stored without touching shared coordinates, and the reply verifies it with a measured before/after check. If a model was hit: the numbers can be restored from a linked model or re-entered; the geometry itself was never moved.
Plugin v1.49 Revit August 2026
New
Set the project's geographic location from the chat. Give an address or coordinates and the model's location (Manage > Location) is set: latitude, longitude and time zone — the basis for sun studies, shadows, energy analysis and the IFC site coordinates. Shared coordinates, base points and True North are never touched, and the reply reads the result back so you see exactly what was set.
On Revit 2027 the site elevation can be set too — it is stored as the model's geolocation reference point, so the model becomes properly geolocated. Older Revit versions do not offer a way to write elevation; the reply says so honestly instead of pretending.
Plugin v1.48 Revit August 2026
New
3D text in a real font. Ask for text in the model and you get actual solid letters — Arial Bold by default, or any installed font — standing in every 3D view and exported as geometry to IFC. Revit itself cannot create Model Text through its API; this closes that gap. You control size, thickness, position, rotation and level, anchor it left/centre/right, and give it a material or a plain colour. Great for signage, coordination markers and print-ready labels.
Improved
On start-up the connector now also tells huskybim.com which application launched it (Claude Desktop, Claude Code, Cursor or VS Code). This helps support tell a real problem from a client that keeps restarting the connector.
Plugin v1.47 Revit August 2026
New
Acquire Coordinates now does what Revit's own command does: your model takes over the linked model's shared coordinates and True North, and the reply shows the measured project position, project base point and survey point before and after. Until now the tool only shifted the base point by the link's placement — with a link placed origin-to-origin it changed nothing while reporting success.
Publish Coordinates now works: your model's shared origin and True North are written into the linked Revit model's site (pick the site, or use its active one). The linked file is saved the next time you save or close, as in Revit.
Get Link Coordinates: read a linked model's sites, project position, base and survey points and location straight through the link — no need to open it — side by side with your own model's, so you can see what Acquire or Publish will change before you do it.
Fixed
Acquire Coordinates tells you when Revit refuses (the coordinates are already identical, the link is placed more than once, or there is nothing to acquire) instead of claiming success.
Opening a file that is currently loaded as a link in an open model now says which model links it and what to do, instead of failing with an unreadable error.
Parameter listings: values such as “Shared Site” no longer show as “0”, and parameters that point at another element show that element's name.
Plugin v1.46 Revit August 2026
New
13 new tools (646 → 659) for Revit 2024, 2025, 2026 and 2027, every one verified with live calls in each Revit version.
Excel round-trip. Export doors, rooms, any category or a schedule to a real .xlsx (or CSV) with the element IDs as keys and colour-coded headers (green = editable instance value, yellow = type value, red = read-only). Edit it in Excel and import it back: Claude shows you exactly what would change first, then writes everything in one step — one Ctrl+Z undoes it all. Lengths are in millimetres, areas in m².
Bulk parameter edits. Set one parameter on hundreds of elements by category, selection or a filter — a fixed value, a find/replace, a prefix or a suffix — with a preview before anything is written.
Project standards to Excel. Project information, object styles, line styles, families and types with instance counts, levels, worksets, project parameters, line patterns and materials in one workbook. The project-parameter sheet can be imported into another project to recreate the parameters.
Batch export. Sheets and views to PDF, DWG, DXF, DGN, DWF, IFC and images in one go, with your own file-name and folder rules (sheet number, name, revision, date, any sheet parameter), a combined PDF option and saved export profiles. A dry run lists the files before anything is written.
Sheets and viewports. Create many sheets from a list or a spreadsheet with views placed like a template sheet, and copy the viewport layout of one sheet onto others.
Room views. Interior elevations, sections and plan callouts for every room or space, cropped to the room, named by your own pattern.
Housekeeping. Renumber marks along a line or a direction, rename families and types by rules, move elements to worksets by category or parameter, and fit a section box around selected elements.
Good to know
Elements inside model groups are listed but left alone by the import and bulk tools — Revit only allows those edits in group edit mode.
Changing a type value on one row of a sheet does not silently change the type for every element: all rows of that type have to agree, otherwise the change is reported and skipped.
The Revit 2026 installer is now named HuskyBIM for Revit 2026, like the other versions. Installing it over v1.45 works as before.
Archicad v1.5.49 Archicad August 2026
New
Terrain elevation at any point. Ask for the height of the terrain mesh at a list of points and get the surface elevation back in project metres. Archicad's own 3D surface of the mesh is used when it exists (ridges honoured); before the 3D window has been opened the mesh outline and level points are triangulated instead. Points outside every mesh say so.
Massing placed on the terrain. Give a footprint and the number of storeys above and below ground: the terrain is sampled under the footprint, the base level chosen (average, lowest, highest or a value you give) and one slab per storey is created on the right story in a single undo step. Dry-run first shows the sampled heights and the storey table without creating anything.
Mesh details. Read a terrain mesh: level, skirt, story, outline with heights, level (ridge) points and the 3D bounding box.
Archicad v1.5.48 Archicad August 2026
New
Mesh (terrain) editing: change level, skirt, level lines and outline of existing meshes. Note: the mesh's layer must be visible — Archicad refuses edits on hidden layers.
Auto-dimensioning inside sections: place associative dimensions on wall composite faces, slab skins, beam/column endpoints or door/window openings directly in a section or elevation view.
Fixed
The 37 tools added in v1.5.47 (groups, keynotes, MEP routes, dimensions and more) ignored their list inputs when called from Claude Desktop — the request arrived empty and the tool did nothing. They now receive the full input and work as intended. Already-installed copies pick the fix up automatically at next start.
Archicad v1.5.47 Archicad August 2026
New
37 new tools (691 → 728), each verified with a live call against Archicad 29.
Keynotes: read the full keynote tree, create/edit/delete folders and items, get autotext tokens, and place keynote-linked labels that update when the keynote changes.
MEP write: create duct/pipe/cable-carrier routes through 3D points, place terminals and fittings, change cross-sections, and connect elements — connections are made for real, not just requested.
Room images: Claude can now see a zone as a rendered plan image.
Associative dimensions that follow the model, wall-thickness auto-dimensioning, and interior elevation viewpoints.
IFC import: open or merge an IFC file into the running project (export already existed).
Element groups (create, look up, suspend mode), typed element relations, section-database contents, view-map creation from project-map items, 2D view transforms and rotation, calculation units, layout custom schemes, on-screen alerts and Graphisoft ID lookup.
Archicad v1.5.46 Archicad August 2026
New
Introduced the new Attribute Usage/Unused tool.
Added the new Library Audit tool.
Implemented the new Model Audit tool.
Plugin v1.45 Revit August 2026
New
Added comprehensive Model Audit functionality, including QC checks for CAD imports (linked and imported, view-specific flags), unpinned grids, levels, links, views not on sheets, and in-place families.
Introduced a rules-as-data verdict system (PASSED/WARNINGS/FAILED) for Model Audit results.
Implemented CSV export for Model Audit results.
Improved
Enhanced Model Audit CSV output with new 'measured' and 'ignored' columns.
Added support to exclude specific rules from the Model Audit verdict using `ignore=`, while keeping their results visible.
Fixed
Corrected reporting for failed Model Audit measurements, now shown as 'unknown' or 'MEASUREMENT INCOMPLETE' instead of '0'.
Plugin v1.44 Revit August 2026
New
Expanded Model Audit capabilities to include where-used checks, external references, view-template details, schedule sections, and element fields.
Introduced a dry-run mode for purging unused elements in the Performance Adviser.
Improved
Enhanced performance for Model Audit processes, including faster schedule table analysis and optimized image type dependent element retrieval.
Improved accuracy in identifying unused elements and handling view-internal owned elements during audits.
Fixed
Resolved an issue where texture paths with Revit library tokens were incorrectly flagged as missing; they are now correctly reported as unresolved if the file is genuinely absent.
Corrected `where-used` reporting for image types when associated with schedule graphic cells, preventing false unused classifications.
Eliminated false positive detections of phantom image type dependents and SunAndShadowSettings in owned elements during audits.
AutoCAD v1.17 · Navisworks v1.3.6 / 2027 v1.0.5 Installer August 2026
Fixed
The prerequisite check now recognizes Microsoft Store installs of Claude Desktop — no more false “NOT FOUND” warning.
Activation now registers under the correct product.
Improved
The installer is now code-signed.
Installer v1.43 Installer August 2026
New
Added MSIX/Store Claude detection.
Improved
The Check Interference tool now performs real solid intersection checks.
Activation now sends connector information.
Fixed
The Find & Replace Text tool now preserves TextNote formatting.
Installer v1.42 Installer August 2026
Improved
License messages now reflect that HuskyBIM is free — the outdated subscription and pricing texts are gone.
The connector reports its real version to Claude Desktop.
SketchUp v1.9 SketchUp August 2026
Improved
License validation now happens once at session start — the same model as every other HuskyBIM connector — with clear messages if the account check cannot complete.
The connector reports its real version to Claude Desktop.
Navisworks v1.3.5 / 2027 v1.0.4 Navisworks August 2026
Improved
License validation now happens once at session start — the same model as every other HuskyBIM connector — with clear messages if the account check cannot complete.
The connector reports its real version to Claude Desktop.
Archicad v1.5.45 Archicad August 2026
New
Token-based access is now required for Bridge functionality.
Improved
Bridge enforcement logic raised to measured Revit parity for enhanced security and reliability.
Validation now completes for Bridge functionality before any tool is served.
The Bridge now fails-closed on network errors for enhanced security.
Implemented hash-based self-update for improved application integrity and security.
Archicad v1.5.44 Archicad August 2026
Improved
License enforcement for the Archicad plugin now occurs at session start via the bridge, consistent with Revit's implementation.
Fixed
Resolved an issue in the Archicad plugin (APX) where free-era users were blocked during their first tool call due to an outdated per-call license gate.
Plugin v1.41 Revit August 2026
New
Skills — save a workflow you have just finished and run it again by name, on any model. Skills run from the chat, or from a Skills button on the HuskyBIM ribbon in Revit.
Pin the ones you use often as their own ribbon buttons, with your own label and either a colour or your own icon.
Run anything as a dry run first: the read-only steps execute against your real model, and everything that would change it is only listed, so you see exactly what would happen before it happens.
Everything a skill changes is now applied in a single operation, so one Ctrl+Z undoes the whole run — even when it touched hundreds of elements. A skill can also be told to roll itself back completely if any step fails.
Live progress while a skill runs, with a Stop button, followed by a readable report of every step — and a copy button for pasting it into a review.
A record of what actually changed in the model, including edits you made by hand, so a check can still be traced back weeks later.
Skills can act on your current selection, apply steps only to elements that match a condition, and count or sum results — so a QA skill can end with a one-line summary instead of a wall of output.
The installer is now code-signed, so Windows and Revit no longer warn about an unverified publisher.
Archicad v1.5.43 Archicad August 2026
New
Added per-element building material setter for basic walls.
Improved
Wall create and modify now report the wall's actual height and thickness back, with the reason when a request could not be applied (composite and profile structures define their own dimensions; top-linked walls follow their story). When a specific height is requested, the top-link is removed so the height actually applies.
Element details now name the IDs that were not found instead of silently skipping them.
The model summary says so when its counts reflect a window other than the floor plan.
Common export and image errors are explained in plain language (wrong window in front, output path too long) instead of raw error codes.
Fixed
The installer now updates the Add-On everywhere Archicad may load it from — previously an update could silently leave Archicad running an old version.
Archicad v1.5.42 Archicad August 2026
New
MEP can now be worked with properly: ducts, pipes and cable trays listed by domain and kind, with dimensions, systems and what each run connects to. Quantities come out by size, system, story and renovation status — metres for the straight runs and a count for the fittings, because fittings are ordered by the piece rather than by the metre.
Fall on drainage in per mille and as a 1:x ratio, with a limit you can set to find the runs that fall too little. A stack is reported as vertical rather than as an enormous gradient, and a pressurised system comes out level because it is.
Levels at both ends of every run: the invert measured inside the pipe and the top outside it, as levels are normally quoted. Rectangular ducts and trays give outside faces instead, because Archicad holds no wall thickness for them. Levels are model levels unless you state what they are measured from — a project altitude or a surveyed benchmark.
Fall and levels can be written onto the floor plan in your own wording, with a dry run that shows exactly what would be placed before anything is. It writes on the story in front of you and refuses to write onto a locked layer.
Route length: how far it is from one point to another along connected runs. This is the route, not a cable length — Archicad models the tray and not the cables in it, so drops, terminations and slack are yours to add.
The connector now finds Archicad when it has moved to another port. Archicad gives its port to the first instance that asks, so a second one — or a first still shutting down as the next starts — ends up elsewhere, and the connector used to report that Archicad was not answering while it sat plainly open.
Archicad v1.5.41 Archicad August 2026
Fixed
MEP elements can now be listed and identified. Asking for ducts, pipes or all MEP elements previously returned an error, and an MEP element's type came back as "Unknown" — in a services model that hid the majority of the model.
Element counts now state which window they were read from. Archicad opens a project on a worksheet, and a count taken there describes that window rather than the model — so a full building could report zero walls with nothing to indicate why.
Sigma Estimates v1.2.2 Sigma August 2026
Fixed
Three tools asked for input under names the bridge never read, so they failed on every call: bulk note append, copy field between items, and find items by regular expression. All three now work as documented.
SketchUp v1.8 · Navisworks v1.3.4 / 2027 v1.0.3 · Tekla v1.0.3 Connectors August 2026
Fixed
Navisworks: the leaf-item path and category filters now actually filter, and the item limit is honoured instead of being ignored.
Tekla: four tools were published twice with conflicting inputs; only the working definition remains.
SketchUp: opening a model over unsaved work now documents the force option, and Dynamic Component tools no longer claim to accept several components per call.
Improved
Tool inputs across these connectors now describe what the plugin genuinely supports - parameters that were silently ignored have been removed or documented.
Archicad v1.5.40 Archicad August 2026
Fixed
Creating a surface now actually applies the colour you ask for, along with usable material settings - previously the surface was stored black whatever colour was given.
Running a publisher set by name now works whether you call the input name or setName.
Archicad v1.5.39 Archicad August 2026
Fixed
The connector could not start at all: the installer declared the wrong module type, so Node refused to load it. Reported by a user - thank you.
Archicad v1.5.38 Archicad August 2026
Fixed
Selecting elements no longer clears the selection instead of making it.
Moving elements to another layer now moves every element, not only the first.
Library part info now takes the element you point at.
A publisher set can be run by name, without needing its id.
AutoCAD Installer v1.15 Installer August 2026
Fixed
Tools that take points, vectors, handle lists or system-variable sets now declare those inputs correctly, so they can be called as documented.
27 tools that took parameters but exposed none - including solid editing, layer states, dynamic block attributes and MText tools - now publish their real inputs.
Installer v1.40 Installer August 2026
Improved
Added a 10-minute timeout for export operations.
Fixed
Bridge schemas updated to correctly match add-in handlers, resolving 26 audit findings.
Revit Installer v1.39 (2024–2027) Installer August 2026
Fixed
Fixed an issue where fresh installations could display an 'Invalid Signature' dialog.
AutoCAD Installer v1.14 Installer August 2026
Fixed
Fixed an issue where fresh installations did not fully trust the code-signing certificate, which could block silent loading of the plugin.
Archicad v1.5.37 Archicad August 2026
Improved
The legacyEids function now accepts element IDs in addition to GUIDs.
Installer v1.38 Installer August 2026
Fixed
Fixed an issue where Revit was blocking the HuskyBIM add-in; the add-in DLL is now digitally signed and its certificate trusted.
Installer v1.36 Installer August 2026
Fixed
Resolved incorrect references to non-existent tools within the add-in.
Archicad v1.5.36 Archicad August 2026
Improved
Enhanced license enforcement to close the application immediately upon definitive license rejection. Network-related license issues will continue to result in warnings.
Installer v1.35 Installer August 2026
Improved
Improved the handling of extension bundles by ensuring `package.json` is included for broader ESM compatibility.
Fixed
Fixed an issue where End-of-Line conversion for `payload index.js` could break `js_sha256` integrity checks.
Archicad v1.5.35 Archicad August 2026
Fixed
Fixed an issue where license validation would crash the process on Node 19+ when a token was set.
Archicad v1.5.34 Archicad August 2026
Fixed
The installer bundled an outdated connector (v1.5.15). Fresh installs now start on the current connector (v1.5.33) immediately, instead of running the old version until the first self-update completed.
Reinstalling no longer reverts the connector to an older version.
Installer v1.34 Installer August 2026
Fixed
The Revit installers (2024–2027) bundled an outdated connector. Fresh installs now start on the current connector (v1.33) immediately, instead of running the old version until the first self-update completed.
Reinstalling no longer reverts the connector to an older version.
Archicad v1.5.33 Archicad July 2026
New
Introduced automatic activation for the Claude Desktop extension during HuskyBIM installation.
Installer now manages the enablement process for the Claude Desktop extension.
Streamlined configuration for the Claude Desktop extension through automated settings file generation.
Installer v1.33 Installer July 2026
New
Enabled the Claude Desktop extension during installation.
Archicad v1.5.32 Archicad July 2026
New
Introduced direct access to Archicad's native JSON commands, providing advanced control for operations without specific tool support.
Added an integrated report window within Archicad for detailed feedback and insights into project data.
Improved
Enhanced control over 3D camera position, cut planes, and shading for precise 3D view configuration.
Implemented more reliable and detailed change reports, accurately describing model modifications and their impact.
Refined handling of Favourites, named properties on attributes, and various default settings for greater stability.
Fixed
Withdrew three calls that close Archicad 29 outright: switching the active 3D style, redrawing a single element, and the stair solver. Each was measured and reproduced on its own; the crashes are in Archicad, not in the connector, so the tools are gone rather than fixed - ac_3d_styles and ac_apply_3d_style say what to use instead.
Fixed tools that failed quietly or reported work they had not done: array parameters never reached Archicad at all (14 tools), eleven tools were never advertised to any client, ac_layers hid a third of the project's layers and never said which were locked, and ac_set_north_direction and ac_set_element_layer_batch each refused the very parameters they asked for.
Fixed the progress window not updating visually during tool calls and resolved problems with database deletion.
Archicad v1.5.31 Archicad July 2026
New
Introduced a new Autotext module, along with support for Element Categories, Curtain Wall Measurements, and Project-embedded Data.
Added core project management capabilities, including Open, Start, and Save As projects, Marquee selection, and Saved Views.
Enabled Authoring GDL objects, a Project Data Store, and expanded API coverage for Application Info, View Options, Navigator Viewpoints, Polygon Editing, Draw Order, and Element Links.
Improved
Enhanced bulk readers with a search box, made ac_filter_elements applicable across an entire model, and completed the parameter audit.
Fixed
Resolved a critical crash with ac_get_room_relations.
Addressed multiple issues, including non-functional mark-up tools, ignored parameters, and ac_select_elements failing to select elements.
Corrected problems with ac_create_object not reading library parts and ac_set_gdl_params not processing input.
Archicad v1.5.30 Archicad July 2026
New
Added functionality to retrieve the currently active Archicad pen set.
Introduced the ac_get_current_pen_set action for programmatic access to the current pen set index.
Improved
Removed a duplicate DoGetAttributesByType implementation to streamline internal attribute handling.
Ensured consistent attribute fetching by consolidating functionality under the existing ac_attributes_by_type action.
Archicad v1.5.29 Archicad July 2026
Improved
Enhanced the Element module with new functions to get and set information strings.
Improved handling and access to compound element information within the Element module.
Expanded Element module capabilities for retrieving 2D and 3D database extents.
Refined wall opening calculations to include core and side offset adjustments.
Added direct deletion functionality for selected elements via the Element module.
Archicad v1.5.28 Archicad July 2026
New
Added suspend-group functionality to **View settings**.
Improved
Enhanced visibility controls, including show/hide options, auto-intersection, and auto-grouping behaviors within **View settings**.
Expanded 3D visualization options to show all or selected elements through **View settings**.
Optimized **Database** rebuild and redraw functionalities for better performance.
Introduced comprehensive options to get and set the locked and visible states of the **Survey Point**.
Archicad v1.5.27 Archicad July 2026
New
Expanded Archicad AutoText capabilities with new tools to get, interpret, set, get flag, set flag, and delete AutoText definitions.
Introduced advanced control over Archicad Graphical Overrides, including tools to enable visual overrides and enable renovation overrides.
Added a new tool to efficiently list Archicad Graphical Override combinations.
All new AutoText and Graphical Override functionalities feature live-verified handlers, ensuring accurate and reliable interaction with Archicad project data.
Archicad v1.5.26 Archicad July 2026
Improved
Improved the building_material_properties tool to correctly read and match against any of a material's advertised names.
Enhanced multi-element processing for several core tools, now ensuring all specified element IDs are processed, not just the first.
The ifc, group, and teamwork tools now fully support multi-element operations.
Improved multi-element handling for lock, unlock, set_wall, renovation, and pen tools, applying actions to all selected elements.
Archicad v1.5.25 Archicad July 2026
Fixed
Addressed an issue where several tools failed to correctly parse element ID parameters when multiple IDs were provided, leading to "elementId required" errors.
Resolved parameter handling for tools such as ifc_attributes, classification_references, and properties.
Fixed a bug affecting group_info and teamwork_reservation_status where element GUIDs were not correctly identified.
Corrected an error in lock_elements and unlock_elements that prevented proper processing of target elements.
Improved parameter parsing for set_wall_properties and element_renovation_status to ensure elements are correctly targeted.
Resolved an issue in set_element_pen and set_element_floor where element ID parameters were misinterpreted.
Archicad v1.5.24 Archicad July 2026
New
Added the `begX` parameter to the create_beam function.
Introduced `x` and `y` parameters for the create_label and create_object functions.
Improved
Improved consistency for attribute deletion functions: delete_layer, delete_composite, delete_fill, delete_surface, delete_profile, delete_line_type, and delete_building_material now correctly resolve attribute names.
The set_zone_category function now accurately resolves zone category names.
Enhanced parameter handling for 13 creation functions, ensuring consistent interpretation of `storyIndex` with a fallback to `floorIndex`.
Archicad v1.5.23 Archicad July 2026
Fixed
Resolved an issue where the `comment` parameter was not correctly processed by add_issue_comment.
Fixed a bug preventing apply_favorite from using the specified `favoriteName` parameter.
Corrected parameter handling for property group and definition management operations, including delete_property_group, delete_property_definition, and property_definition_details.
Addressed parameter recognition issues in view-related operations such as go_to_view and open_view.
Fixed parameter mismatches affecting delete_navigator_item and rename_navigator_item.
Resolved an issue where the `storyIndex` parameter was not correctly recognized by story_details and elements_on_floor.
Fixed an issue preventing create_property_definition from correctly applying the `valueType` parameter.
Corrected parameter handling in export_ifc for specifying the `outputPath`.
Archicad v1.5.22 Archicad July 2026
Fixed
Fixed an issue where Story Rename operations incorrectly targeted Floor 0 instead of the selected story.
Resolved a bug where Story Height Adjustment operations always modified Floor 0 regardless of the intended target.
Addressed a critical issue where Story Delete operations silently removed Floor 0 even when another story was selected.
Story management operations (rename, adjust height, delete) now consistently apply to the intended story.
Archicad v1.5.21 Archicad July 2026
Fixed
Fixed an issue with the ac_create_section API call where Archicad sections could not be created due to missing depth line or source marker parameters. This process now correctly follows the Archicad DevKit pattern.
Archicad v1.5.20 Archicad July 2026
Fixed
Fixed an issue where the ac_set_element_layer tool ignored the specified layer name, causing elements to be incorrectly assigned to a default layer.
Archicad v1.5.19 Archicad July 2026
Fixed
Resolved an issue where changing the Renovation Status for Archicad elements would not apply correctly.
Archicad v1.5.18 Archicad July 2026
Fixed
Addressed a silent failure in ac_create_property_group that prevented proper property group creation.
Ensured ac_create_property_group now reliably returns group GUIDs upon successful execution.
Resolved an underlying issue where property write operations in Archicad APIs were not consistently wrapped in undoable commands, improving data integrity for operations like ac_create_property_group.
Archicad v1.5.17 Archicad July 2026
Fixed
Corrected an issue where newly created Roofs would always default to 0.3m thickness, ignoring the specified value.
Archicad v1.5.16 Archicad July 2026
Fixed
Fixed an issue where ac_zone_details reported incorrect (zero) area and perimeter values for zones.
Corrected an issue where ac_create_slab ignored the specified slab thickness, defaulting to composite settings.
Resolved a bug where ac_create_column did not apply the specified column height, defaulting instead to story height.
Plugin v1.32 Revit July 2026
New
Introduced 13 new system-family type creators for fluids, pipe schedules, various electrical components, HVAC load classifications, mechanical equipment sets, rebar end treatments, building pads, and direct shapes.
Added new creation tools for tags (room, space, area), curtain systems, roof fascia/gutter, slab edges, MEP takeoff fittings, and splitting rebar (Rebar.SplitRebar).
Implemented creation of generic zones (GenericZone), enabled configuration of rebar splice rules as document settings, and enhanced geometry referencing for improved stability.
Restored access to previously unavailable tools, including BuildingEnvelopeCompute, view background controls, subelement modification, and creating project-usable solids via ExtrusionDirectShape.
The HuskyBIM startup notice now dismisses automatically after 4 seconds — no click required every launch — and shows a larger logo.
Fixed
Resolved various issues improving Revit version compatibility and robustness, including a fix for configuring rebar splice rules in Revit 2024, correcting steel tools, and enhancing enum parsing guards.
Fixed an issue where creating BuildingPad types could duplicate existing entries and ensured version-safe creation of electrical types, providing clear errors for unsupported Revit versions.
Plugin v1.31 Revit July 2026
New
Introduced new Linear Array tool for precise and efficient placement of multiple elements.
Added Radial Array tool to create organized circular patterns of elements around a point.
Implemented a robust core array engine, enhancing stability and performance for complex patterns.
Enabled associative array functionality, allowing dynamic adjustments to arrayed elements and their properties.
Improved array editing workflows with intuitive graphical controls for pattern modification.
Plugin v1.30 Revit July 2026
New
Expanded core functionalities, addressing identified gaps in existing tools.
Added create_selection_filter for advanced element selection control.
Introduced create_displacement_set for managing displaced views.
Plugin v1.29 Revit July 2026
New
Added support for auditing **Linear Dimensions**, **Arc Length Dimensions**, **Filled Regions**, **Topography**, **Schedules on Sheets**, **Color Fill Legends**, and **Duct Linings** in the audit batch process.
Fixed
Resolved an issue preventing the creation of **Linear Dimensions** and **Arc Length Dimensions** in Revit 2024 by implementing reflective instantiation for compatibility.
Corrected the identification of witness geometry for **Arc Length Dimensions** to properly use end-cap faces.
Fixed an issue in **Linear Dimension** testing related to parallel wall detection.
Prevented **Filled Regions** from being erroneously included in the audit batch.
Plugin v1.28 Revit July 2026
New
Introduced the `get_material_takeoff` method within the Analyze functionality.
Enabled per-material volume and area quantity takeoff (QTO) via the new `get_material_takeoff` method.
Fixed
Fixed an issue with Material Takeoff when handling empty `elementIds` arrays.
Plugin v1.27 Revit July 2026
New
Introduced a new Collaborate feature: link_revit, enabling direct Revit-to-Revit model linking.
Fixed
Addressed an issue where LinkLoadResult.IsCodeSuccess was incorrectly declared as static.
Plugin v1.26 Revit July 2026
New
DocumentPresent: Added methods for creating callouts, angular dimensions, and radial dimensions.
Fixed
Corrected angular and radial dimension creation to utilize modern, project-valid static methods (e.g., AngularDimension.Create, RadialDimension.Create).
Improved angular dimension vertex calculation, implementing manual 2D intersection for compatibility with Revit 2027's Curve.Intersect changes.
Addressed an issue preventing radial dimension creation in Revit 2024 by adjusting the reflection mechanism due to class availability.
Plugin v1.25 Revit July 2026
Fixed
Addressed an issue in create_mep_system where connectors were not always filtered correctly by system type.
create_mep_system now accurately filters connectors by matching DuctSystemType or PipeSystemType for improved system assignment.
Enhanced create_mep_system to ensure reliable system connections for equipment with multiple system types, such as HRUs with supply, return, and exhaust.
Plugin v1.24 Revit July 2026
New
Introduced new MEP functionality: create_mep_system for comprehensive mechanical and piping system creation.
Added the connect_connectors tool to streamline MEP element connections.
Improved
Enhanced create_mep_system to enforce Revit's family-instance-connector contract, ensuring more robust system generation.
Improved MEP routing logic with verified support for HVAC elbows in routing-dependent scenarios.
Plugin v1.23 Revit July 2026
New
Enabled automatic connection for MEP elbow fittings.
Introduced functionality to connect MEP tee fittings.
Added support for connecting MEP transition fittings.
Implemented connectivity for MEP union fittings.
Provided capabilities to connect MEP cross fittings.
Introduced new functionality to create spaces within the model.
Plugin v1.22 Revit July 2026
New
Enhanced ArchDesign capabilities with new options to set wall taper.
Introduced new roof generation tools within ArchDesign for creating extrusion roofs, supporting both gable and mono-slope types.
Added new functionality to ArchDesign for creating L-shaped stairs.
Plugin v1.21 Revit July 2026
New
New tool: Create Multistory Stair.
New tool: Create Sloped Roof.
New tool: Create Spiral Stair.
New tool: Create Curved Wall.
New tool: Set Wall Slant.
Fixed
Resolved an issue in Create Stair related to transaction handling.
Fixed an initialization problem with sloped roof footprints.
Plugin v1.20 Revit July 2026
New
Introduced Batch-13 rebar couplers, including automatic family creation from templates.
Fixed
Rebar couplers now automatically match the rebar bar size.
Plugin v1.19 Revit July 2026
New
Introduced the create_rebar_free_form tool for creating advanced free-form rebar.
Enabled support for defining rebar with arbitrary 3D paths.
Enhanced Oracle integration to include dumping of properties and generics.
Plugin v1.18 Revit July 2026
New
Added Batch-11 boundary conditions, including point, line, and area supports.
Improved
Removed the standalone `fabric_sheet` command; use create_fabric_area for fabric element creation.
Enhanced reliability with verification of line, area loads, and boundary conditions on analytical hosts.
Plugin v1.17 Revit July 2026
New
Introduced Batch-10 rebar capabilities.
Added the ability to create rebar directly from curves using create_rebar_by_curves.
Implemented precise control over rebar layout with set_rebar_layout.
Plugin v1.16 Revit July 2026
New
Added initial support for Batch-9 columns.
Introduced the new tool create_slanted_column.
Added new tools attach_column_top_base and detach_column_top_base for managing column top and base attachments.
Fixed
Resolved a naming collision for column attachment tools to prevent conflicts with existing column-to-wall functions.
Plugin v1.15 Revit July 2026
New
Introduced the ability to create fabric reinforcement areas for Batch-8 reinforcement.
Added support for creating fabric reinforcement sheets within Batch-8 workflows.
Enabled setting rebar cover for Batch-8 reinforcement elements.
Plugin v1.14 Revit July 2026
New
Enabled creation of structural connections within your models.
Introduced the new StructuralConnectionHandler for enhanced control over structural connection definitions.
Added capabilities to associate analytical and physical model elements.
Implemented the AddAssociation tool for streamlined linking between analytical and physical models.
Plugin v1.13 Revit July 2026
New
Enhanced framing capabilities to support more complex geometries and connections.
Introduced the create_curved_beam tool to generate curved beams from arc geometry.
Expanded the create_curved_beam tool to also support line geometry for curved beam creation.
Implemented the set_framing_join tool, allowing users to precisely disjoin or rejoin framing elements.
Plugin v1.12 Revit July 2026
Improved
Improved `create_structural_load` to support creating Line loads.
Improved `create_structural_load` to support creating Area loads.
Fixed
Fixed an issue in `get_analytical_model` related to an outdated internal API, ensuring robust analytical model extraction.
Plugin v1.11 Revit July 2026
New
Introduced new structural tools: create_truss, create_load_combination, and create_load_nature.
Added modern analytical model tools: create_analytical_member and create_analytical_panel (leveraging the 2023+ API).
Fixed
Resolved an issue where create_truss incorrectly collected `TrussType` instead of `FamilySymbols` for truss creation.
Plugin v1.10 Revit July 2026
New
Added new functionality to create wall foundations.
Introduced capability to create isolated foundations.
Implemented support for creating foundation slabs.
Plugin v1.9 Revit July 2026
New
Introduced core Model Tier-1 tools, including divide_parts, cut/uncut geometry, and slab shape-editing capabilities.
Improved
Enhanced diagnostic and validity checks for divide_parts.
Improved the overall robustness of divide_parts, particularly for part-count checks and wall reference guidance.
Fixed
Resolved an issue where divide_parts curve mode was unreliable, now using vertical reference planes for consistent results.
Fixed an issue preventing divide_parts from always creating a valid SketchPlane.
Corrected parameter usage in slab shape editing, updating `z` to `offsetMm` for adding points.
Addressed a bug in slab shape editing where AddSplitLine failed to properly crease after adding points.
Corrected API method calls within SlabShapeEditor for adding points and drawing split lines.
Plugin v1.8 Revit July 2026
Fixed
Standardized all dimensional input fields to consistently interpret values in millimeters.
Resolved an inconsistency where some dimensional inputs incorrectly assumed meter units, leading to scaling discrepancies.
Ensured uniform unit handling across various plugin functionalities that accept measurements.
Autodesk Docs v1.3.1 Autodesk Docs July 2026
New
New product: HuskyBIM for Autodesk Docs — 57 tools for Autodesk Docs / Autodesk Construction Cloud (ACC), BIM 360 and Fusion Team, built on Autodesk's official APS SDK.
Browse hubs, projects, folders and versions; search, upload (chunked for large models) and download files.
ACC Issues (create/comment/update), project admin reads and project creation, cloud-Revit export/publish, and a generic authenticated APS escape hatch.
SketchUp v1.4.1 SketchUp July 2026
New
New product: HuskyBIM for SketchUp — 185 tools for Trimble SketchUp 2026 via a native Ruby extension.
Geometry and solid booleans with exact volumes, tags, materials, components, scenes, measurement, import/export and a Ruby escape hatch.
LayOut drawing-sheet automation (viewports, dimensions, tables, PDF), IFC classification and export, and a Trimble Connect cloud client in beta.
Tekla Structures v1.0.2 Tekla July 2026
New
New product: HuskyBIM for Tekla Structures — 198 tools for Tekla Structures 2026 via the Tekla Open API.
Create and edit 70+ object types: beams, plates, bolts, welds, assemblies, cast units, phases, grids and modern RebarSet reinforcement.
Complete drawing workflow (assembly/GA drawings, annotation, PDF printing), 4D task scheduling, whole-model QTO, clash checking and IFC4/IFC2x3/DGN/MIS/NC export.
Civil 3D v1.7 Civil 3D July 2026
New
New product line: HuskyBIM for Civil 3D — 89 civil tools on top of the AutoCAD connector (446 tools in Civil 3D 2027).
Surfaces, alignments, profiles, pipe and pressure networks, COGO points, sites and parcels; full corridor modeling with 122 catalog subassemblies and corridor surfaces.
Coordinate engine covering 4,541 individually verified EPSG systems plus Danish System 34/45; cross-sections with real elevations, designed-road earthworks and 4D construction scheduling.
AutoCAD v1.7 AutoCAD July 2026
New
Expanded to 386 tools across AutoCAD 2026–2027 and all verticals.
Plant 3D project reads, Raster Design tools (incl. raster-to-vector and OCR) and Map 3D FDO/GIS read-write.
Sigma Estimates v1.2.1 Sigma July 2026
New
Expanded from 103 to 141 tools — structural editing (create/insert/delete/duplicate rows), a formula engine, generic field access, custom fields and key figures.
Fixed a packaging issue in earlier bundles and improved connection robustness.
MS Project v1.1 MS Project July 2026
New
Expanded to 295 tools — full application control overhaul.
Project Server tools reimplemented via native COM, ~40 new automation tools, and VBA/generic escape hatches for anything beyond the built-ins.
Dalux v0.4.0 Dalux July 2026
New
New product: HuskyBIM for Dalux — 141 tools for Dalux Build & FM.
Drives the Dalux desktop app (projects, tasks, QC issues, files, handover, locations) and uploads AEC files to Box.
Optional official Dalux REST API layer unlocks full create/update with your company's API key.
Navisworks v1.3.1 Navisworks July 2026
New
Expanded to 82 tools for Navisworks Manage 2026 — clash detection verified end-to-end on live federated models.
4D TimeLiner, viewpoints, section planes and model-tree improvements, plus Cursor/VS Code/Windsurf support in the installer.
Installer v1.6 Installer July 2026
Fixed
Fixed a potential Remote Code Execution vulnerability in the DynamoRunScript feature by restricting allowed file types to only .dyn files.
Archicad v1.5.15 Archicad July 2026
Fixed
Resolved an issue that prevented automatic updates of the Archicad Add-on.
Corrected internal version string management to ensure proper update detection.
Improved the robustness of the auto-update process for the Archicad Add-on.
Archicad v1.5.14 Archicad July 2026
New
Full support for creating rectangular, circular, and polygonal openings with the CreateOpening tool.
Improved
OpenView and GoToView now reliably open all Navigator views by correctly using the appropriate API and recursing through nested folders.
Fixed
Resolved stability issues and crashes when creating openings by ensuring all CreateOpening operations are correctly wrapped in an undoable command.
Archicad v1.5.14 Archicad July 2026
New
Create Openings in walls, slabs and roofs — rectangular, circular and custom polygonal shapes.
Write IFC data — set IFC properties, attributes and classification references, delivered on export.
Export IFC models and read full 3D geometry and body counts.
Save window and element images (PNG/TIFF) and open saved views.
Grew to 273 tools, all tested against Archicad 29.
Fixed
Resolved element-placement crashes by wrapping model edits in undoable commands.
Removed a duplicated tool definition.
Archicad v1.3.4 Archicad July 2026
New
Added full support for creating Curtain Walls.
Introduced functionality for creating Roofs.
Added tools for creating Railings.
Enabled creation of Morph elements.
Added commands to Rotate Elements.
Added commands to Mirror Elements.
Improved
Installer output filenames now dynamically include the application version.
Fixed
Resolved an issue where the height of elements created with CreateWall was incorrect.
Archicad v1.3.3 Archicad July 2026
Improved
Improved Archicad 29 detection: System now utilizes robust .pln file association, supports any install path, performs comprehensive all-drive scans, and provides a user browse/validate fallback.
Archicad v1.3.2 Archicad July 2026
Improved
Improved detection of localized Archicad 29 installations (e.g., German, Austrian).
Enhanced compatibility with 64-bit Archicad installations.
More robust installation process, ensuring HuskyBIM Add-Ons are copied to the correct Archicad folder.
Archicad v1.3.1 Archicad July 2026
New
Connector now sends its version information during validation processes.
Fixed
Resolved an issue with an unterminated AppVersion define.
Installer v1.5 Installer June 2026
New
Configured Cursor to operate as an MCP client.
v1.0 Revit 2024 June 2026
New
New separate product: HuskyBIM for Revit 2024, built on .NET Framework 4.8 for Autodesk Revit 2024 — 486 AI tools (2 wall attach/detach tools require Revit 2025+).
Runs side by side with HuskyBIM for Revit 2025/2026/2027 (own connector on port 14259) — install all without conflict.
Wall attachment / detach tools require Revit 2025+ (the API does not exist in Revit 2024) — every other tool is fully supported.
v1.0 Revit 2025 June 2026
New
New separate product: HuskyBIM for Revit 2025, built on .NET 8 for Autodesk Revit 2025 — 488 AI tools.
Runs side by side with HuskyBIM for Revit 2026 and 2027 (own connector on port 14258) — install all without conflict.
HuskyMCP is not installed automatically — add it separately if you want the free cloud knowledge base.
v1.0 Revit 2027 June 2026
New
New separate product: HuskyBIM for Revit 2027, built on .NET 10 for Autodesk Revit 2027 — 488 AI tools.
Runs side by side with HuskyBIM for Revit 2026 (own connector on port 14257) — install both without conflict.
Modern HVAC zone support via Revit 2027's GenericZone API (create zones with spaces programmatically).
v1.4 Revit 2026 June 2026
Changed
HuskyMCP is no longer installed automatically — add it separately if you want the free cloud knowledge base.
Renamed to HuskyBIM for Revit 2026 for clarity alongside the new Revit 2027 product.
Plugin v1.3 Revit June 2026
Fixed
Improved diagnostic feedback when finding parameter IDs across categories.
Eliminated silent skips during parameter ID lookup for categories, enhancing reliability.
Corrected an issue where the filter scope in the Create View Filter tool was not applied as expected.
Plugin v1.2 Revit June 2026
Fixed
Fixed an issue where project parameter lookups could be unreliable in specific Revit environments.
Addressed a bug preventing accurate retrieval of shared parameters from linked models.
Resolved an intermittent error that occurred when attempting to modify existing family parameters.
Improved stability when handling large numbers of project parameters in complex models.
Installer v1.0.20 Installer May 2026
Fixed
Resolved issues with mm-unit suffix handling, silent transaction failures, parallel activation race conditions, wall height disconnection, search_elements parameter binding, and element error diagnostics.
Added revit_rename_type and revit_get_element_errors tools.
Installer v1.0.19 Installer May 2026
Fixed
Resolved an issue affecting B17 unit handling during copy and array operations.
Installer v1.0.18 Installer May 2026
Fixed
Addressed an issue affecting B16 project coordinate system consistency.
Installer v1.0.17 Installer May 2026
Fixed
Addressed an issue where installation could fail on certain Windows 11 configurations.
Resolved a bug preventing successful uninstallation of previous versions during upgrade attempts.
Corrected an issue that sometimes led to corrupted download packages under unstable network conditions.
Fixed a problem where the installer wizard occasionally displayed incorrect progress during file extraction.
Improved the robustness of licensing service registration during the installation process.
Installer v1.0.16 Installer May 2026
Fixed
Resolved an issue with incorrect length unit handling when setting parameters in batch.
Addressed a rare case where the installer UI would become unresponsive during setup.
Improved reliability of prerequisite checks on specific Windows versions.
Corrected an issue where temporary installation files were not always removed upon completion.
Plugin v1.0.13 Revit May 2026
Fixed
Resolved a length unit inconsistency in **batch_set_parameters** to align with **set_parameter**, ensuring consistent meter-based calculations.
Installer v1.0.15 Installer May 2026
Fixed
Resolved an issue where the installer could fail on specific system configurations.
Fixed a bug preventing proper uninstallation of certain components.
Addressed an intermittent issue with dependency checks during installation.
Improved error reporting when installation prerequisites are not met.
Corrected an issue with applying updates to previously installed versions.
Fixed a bug causing incorrect directory permissions after installation on some systems.
Installer v1.0.14 Installer May 2026
Fixed
Resolved an issue with parameter binding for B18-B27 elements.
Corrected various discrepancies in unit handling and display.
Addressed several display and functionality issues within assembly views.
Sigma Estimates v1.1.0 Sigma May 2026
New
Expanded from 15 to 103 tools — full coverage of the estimate workflow.
New tree navigation tools: deep chapter expansion, items at level, breadcrumb path, item-by-number lookup.
New item write tools: set number/unit/unit price, rename chapter, append to note, copy fields between items.
Bulk write: set note/category/unit across a chapter, scale quantities by factor, find-and-replace in descriptions.
18 search/filter tools: by category, unit, price range, quantity range, note presence, regex, number prefix.
22 analytics tools: cost distribution, category breakdown, QA report, price outliers, sorted item lists.
12 export tools: CSV, Markdown table, JSON, printable text report, cost summary.
Sigma Estimates v1.0.1 Sigma May 2026
Fixed
Fixed license validation endpoint and added machine identifier for proper activation.
Sigma Estimates v1.0.0 Sigma May 2026
New
Initial release — 15 tools covering estimate navigation, item read/write, chapter summaries and project totals.
Delivered as a Claude Desktop extension (.mcpb) — no installer required.
COM bridge to Sigma Estimates for real-time quantity and cost access.
Navisworks v1.0.0 Navisworks May 2026
New
Initial release — 78 tools covering model queries, clash detection, 4D TimeLiner, viewpoints, section planes, appearance overrides, selection sets, geometry analysis and export.
Native .NET plugin for Navisworks Manage 2026, installed without administrator rights.
Automatic license validation and auto-update support.
Archicad v1.0.2 Archicad May 2026
New
Implemented an automatic update system for streamlined future upgrades.
Introduced a unique machine identifier for enhanced license management.
Enabled automatic download and installation of minor updates.
Established a foundation for improved diagnostics and personalized support.
Installer v1.0.12 Installer May 2026
Fixed
Fixed an issue preventing the installer from performing automatic updates.
Installer v1.0.11 Installer April 2026
New
Automatic configuration of VS Code and Windsurf MCP during installation.
Fixed
Restored Unicode checkmarks in the prerequisites user interface.
Corrected installer script path for Revit subdirectories.
Fixed product name display in the installer.
Ensured installer layout compatibility with ARC29 specifications.
Archicad v1.0.1 Archicad April 2026
New
Auto-configure VS Code and Windsurf MCP at install time.
Show version in Add/Remove Programs.
Fixed
Corrected machine limit error message from 3 to 2.
Installer v1.0.10 Installer April 2026
Improvements
Installer now auto-configures VS Code and Windsurf in addition to Claude Desktop — any detected MCP client is wired up automatically.
Version number now shown in Windows Add/Remove Programs.
Bug fixes
Machine limit error message now correctly states 2 machines (previously showed 3).
Plugin v1.0.9 Revit April 2026
New tools
get_room_boundaries — returns room boundary curves for downstream calculations.
get_element_geometry — returns solid geometry and bounding box for any element.
set_element_workset — moves elements between worksets in workshared models.
Improvements
Batch parameter write operations now run in a single transaction, faster on large selections.
Improved error messages for tools that require an active view.
ArchiCAD v1.0.0 ArchiCAD April 2026
Initial release
168 verified tools across elements, attributes, classifications, layouts, issues, stories and properties. More tools in active development.
Full BCF issue workflow: create, comment, assign, resolve.
Layer combination management with template-based creation.
Classification system creation with full IFC alignment support.
Plugin v1.0.8 Revit March 2026
New tools
export_bcf — export BCF 2.1 issue reports from Revit.
import_bcf — import BCF files and create issues in the model.
get_material_quantities — returns material takeoff data for selected elements or entire model.
Improvements
488 tools total — expanded from 412 in v1.0.7.
Connection handshake timeout increased to 30s to support slower project open times on large models.
← HuskyMCP